Understanding Carpet Part II
It is best to consider the following points to identify the carpet.
1 – In the early stage, we must identify the raw materials used in the carpet to ensure that they are natural, that the method of identifying wool and natural silk was described in the main factors.
2 – Next we need to ensure the color consistency of the cream used in the carpet because the cream will not be color stable if the materials are painted and generally the carpet woven with the above cream will be worthless.
3 – Carpet dimensions control according to the design and role that we should consider the following.
(A) In the case of carpets woven with map 1.4, the following should be noted.
-First, determine the center of the rug, then measure the rug from the beginning to the middle and from the middle to the end, which should be equal in size, and then do the same in width. The left and right half of the rug are equal.
– In case of carpets of bergamot and bergamot, bergamot should be located in the center of the carpet and should be symmetrical on both sides of the carpet on the lower side of the carpet and should be equal in size. In addition, the motifs and flowers of the four sides of the rug must be symmetrical in the design, and the upper half plan should be the same as the lower half and opposite.
B) The following points are required for Map 1.2 as well.
We first measure the width of the rug by the meter and then determine its center, which in the case of Map 1.2 should be equal to the left and right half of the rug and the design of the left and right rug should be symmetrical.
(C) In the case of maple maps, the dimensions of all parts of the maple shall also be equal.
D) In the case of overall roles, the dimensions of the motifs should be proportional to the number of rugs and drawings.
4 – Texture control: As you know, carpets are woven with two types of Persian and Turkish knots, so that we can identify the type of carpet knot, with one needle we cut the roots back. If one root came out the knot is Persian and if neither came out the knot is Turkish and if both roots came out the carpet is knitted with knot and is of no value in terms of durability and strength. Also, by dipping our fingers into the carpets we can see that the carpet is hollow or hollow if our fingers are easily penetrated into the carpets and reach the tarp pads. Not necessary.
5 – Carpet Count: As you know the higher the carpet count, the rug is more elegant and valuable. To control the count, if the carpet is woven with Persian knot mark 6.5 cm and count the knots and if knit with Turkish knot mark 7 cm and count the knots to determine the count. The rug must match the length and width of the rug, if the carpet is mismatched.
6 – Carpet Sleep Control: The height of the carpets that form the carpet sleep varies depending on the carpet count and varies from 12 to 3 mm.
The important thing is that the height of the towels should be the same in all parts of the carpet and not the lamb carpet, which can be done by touching the carpet with the fingers.
In addition, the height of the villi should not be low (corn) because it is not durable if the carpet is corn.
7 – Carpet Behind Control: There are many things you can do to control the back of a carpet. The back of the carpet should be smooth and uniform and at the same time the back of the carpet should be controlled for the lack of flatness, tear and type of wicking.
8 – Carpet weaving: The first and last carpet weaving should be controlled and the minimum number of carpet weights should be 10 and if the carpet pads are of the same type it is better.
9 – Carpet Control: The carpet should not be damaged in case, carpet, tilt, double color, uplift, lower because if the carpet has case, for example, the case of Casey will be exposed to abrasion and its lint will be removed. It turns into a river.
10 – Controlling the carpet buds: in terms of being one-handed and uniform.
11 – Carpet control in terms of corrosion: This defect can be seen behind the carpet for various reasons and the carpet is worn.
The causes that cause this fault are:
A) No anti-moth cream
B) prolongation of tissue length
C) Keep the carpet in a warm, humid place away from the air for a long time